Philips BTM2056 Посібник користувача - Сторінка 12
Переглянути онлайн або завантажити pdf Посібник користувача для Стереосистема Philips BTM2056. Philips BTM2056 19 сторінок. Philips btm2056 micro music system short user manual
Також для Philips BTM2056: Короткий посібник (3 сторінок), Посібник користувача (21 сторінок), Короткий посібник користувача (2 сторінок), Короткий посібник користувача (2 сторінок), Інструкція з монтажу (2 сторінок)
Друкувати сторінку
5 Listen to FM
radio
Tune to FM radio stations
Note
•
Position the antenna as far as possible from TV, VCR, or
other radiation source.
•
Make sure that you have connected and fully extended
the supplied FM antenna.
1
Press FM to select FM tuner mode.
2
Press and hold
» [SEARCH] (search) is displayed.
» The system tunes to an FM station
with strong reception automatically.
3
Repeat step 2 to tune to more stations.
To tune to a station with weak signal:
Press
/
repeatedly until you find good
reception.
Program FM radio stations
automatically
Note
•
You can program a maximum of 20 preset FM radio
stations.
In FM tuner mode, press and hold PROG for 3
seconds.
» [AUTO] (auto) is displayed.
» The system stores all the FM radio stations
automatically, and then broadcasts the first
preset radio station.
/
for 3 seconds.
Program FM radio stations
manually
1
In tuner mode, tune to an FM radio station.
2
Press PROG to activate programming
mode.
» [PROG] (program) blinks.
3
Press
or
repeatedly to select a
channel number.
4
Press PROG again to confirm.
5
Repeat steps 1-4 to store other FM
stations.
Note
•
To remove a pre-stored station, store another station
in its place.
Select a preset radio station
In tuner mode, press
buttons to select a preset number.
Select stereo/mono broadcast
Note
•
Stereo broadcast is the default setting for tuner mode.
•
For stations with weak signals: to improve the reception,
change to monaural sound.
In FM tuner mode, press
mono and stereo broadcast.
/
or the numeric
to switch between
EN
12