Philips DCM 278 Kullanıcı Kılavuzu - Sayfa 13

Stereo sistemi Philips DCM 278 için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. Philips DCM 278 18 sayfaları. Sleek micro sound system
Ayrıca Philips DCM 278 için: Kullanıcı Kılavuzu (22 sayfalar), Kullanıcı Kılavuzu (19 sayfalar), Kullanıcı Kılavuzu (21 sayfalar), Hızlı Başlangıç Kılavuzu (3 sayfalar), Hızlı Başlangıç Kılavuzu (4 sayfalar), Hızlı Başlangıç Kılavuzu (3 sayfalar), Hızlı Başlangıç Kılavuzu (3 sayfalar), Montaj Talimatları (1 sayfalar), Teknik Özellikler (3 sayfalar), Teknik Özellikler (3 sayfalar), Teknik Özellikler (3 sayfalar)

Sayfayı Yazdır
Philips DCM 278 Kullanıcı Kılavuzu

6 Listen to radio

Tune to a radio station

1
Press TUNER to select FM.
2
Press and hold
seconds.
» SEARCH] (search) is displayed.
[
»
The radio tunes to a station with
strong reception automatically.
3
Repeat step 2 to tune to more stations.
•
To tune to a weak station, press
repeatedly until you find optimal
reception.
Program radio stations
automatically
You can program a maximum of 20 preset
radio stations (FM).
1
In the tuner mode, press and hold PROG/
CLOCK SET for more than 2 seconds to
activate automatic program mode.
» AUTO] (auto) is displayed.
[
»
All available stations are programmed
in the order of waveband reception
strength.
»
The first programmed radio station is
broadcast automatically.
Program radio stations
manually
You can program a maximum of 20 preset
radio stations (FM).
1
Tune to a radio station.
2
Press PROG/CLOCK SET to activate
program mode.
» PROG] (program) is displayed.
[
14
EN
/
for more than 2
3
Press / to allocate a number to this
radio station, then press PROG/CLOCK
SET to confirm.
4
Repeat the above steps to program other
stations.
Tip
•
To overwrite a programmed station, store
another station in its place.

Select a preset radio station

/
1
In tuner mode, press / to select a
preset number.
Tip
•
Position the antenna as far as possible from
TV, VCR or other radiation source.
•
For optimal reception, fully extend and adjust
the position of the antenna.

FM stations with RDS

Radio Data System (RDS) is a service that
sends additional broadcast information along
with FM stations.
If you listen to a FM station with RDS signal,
"RDS" is displayed.
Display RDS information
1
For an FM station with RDS, press
RDS/DISPLAY repeatedly to display
various broadcast information.