Epson WorkForce 600 Series Kullanıcı Kılavuzu - Sayfa 8

Yazılım Epson WorkForce 600 Series için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. Epson WorkForce 600 Series 34 sayfaları. Using the control panel for wireless network installation
Ayrıca Epson WorkForce 600 Series için: Ağ Kurulum Kılavuzu (41 sayfalar), Kullanıcı Kılavuzu (38 sayfalar), Kartuşların Değiştirilmesi (2 sayfalar), Önemli Kurulum Bilgileri (2 sayfalar), Teknik Özellikler (2 sayfalar), Buradan Başlayın Kılavuzu (9 sayfalar), Ürün Destek Bülteni (5 sayfalar), İşlev Kılavuzu (28 sayfalar)

Download the update for your system at http://swupdates.info.apple.com.

Contact Apple if you have problems installing the update.

To find out which operating system your iMac is running, select About This

Computer in the Apple menu.

Setting Up the Printer

If you've been using your EPSON printer with your computer, the printer is

probably set up already. If so, turn off your system and disconnect the printer

from the computer. Then go to "Connecting the Cable" below to attach the

USB/Parallel Adapter cable to your system.

If you're setting up a new printer, see the documentation that came with your

printer for instructions on unpacking it, installing ink cartridges, and loading

paper. Then return to this booklet for instructions on connecting the cable

and installing your printer software.

You can connect the USB/Parallel Adapter directly to a USB port on your

Macintosh or to a USB hub connected to a port on the Macintosh. If you

have any printing problems when the printer is connected via a USB hub, try

connecting the printer directly to a USB port on the computer instead.