Epson WorkForce 600 Series Gebruikershandleiding - Pagina 8

Blader online of download pdf Gebruikershandleiding voor {categorie_naam} Epson WorkForce 600 Series. Epson WorkForce 600 Series 34 pagina's. Using the control panel for wireless network installation
Ook voor Epson WorkForce 600 Series: Handleiding voor netwerkinstallatie (41 pagina's), Gebruikershandleiding (38 pagina's), Cartridges vervangen (2 pagina's), Belangrijke installatie-informatie (2 pagina's), Specificaties (2 pagina's), Start hier Handleiding (9 pagina's), Product ondersteunings bulletin (5 pagina's), Functiehandboek (28 pagina's)

Download the update for your system at http://swupdates.info.apple.com.

Contact Apple if you have problems installing the update.

To find out which operating system your iMac is running, select About This

Computer in the Apple menu.

Setting Up the Printer

If you've been using your EPSON printer with your computer, the printer is

probably set up already. If so, turn off your system and disconnect the printer

from the computer. Then go to "Connecting the Cable" below to attach the

USB/Parallel Adapter cable to your system.

If you're setting up a new printer, see the documentation that came with your

printer for instructions on unpacking it, installing ink cartridges, and loading

paper. Then return to this booklet for instructions on connecting the cable

and installing your printer software.

You can connect the USB/Parallel Adapter directly to a USB port on your

Macintosh or to a USB hub connected to a port on the Macintosh. If you

have any printing problems when the printer is connected via a USB hub, try

connecting the printer directly to a USB port on the computer instead.