Epson WorkForce 600 Series Buradan Başlayın Kılavuzu - Sayfa 5

Yazılım Epson WorkForce 600 Series için çevrimiçi göz atın veya pdf Buradan Başlayın Kılavuzu indirin. Epson WorkForce 600 Series 9 sayfaları. Using the control panel for wireless network installation
Ayrıca Epson WorkForce 600 Series için: Ağ Kurulum Kılavuzu (41 sayfalar), Kullanıcı Kılavuzu (34 sayfalar), Kullanıcı Kılavuzu (38 sayfalar), Kartuşların Değiştirilmesi (2 sayfalar), Önemli Kurulum Bilgileri (2 sayfalar), Teknik Özellikler (2 sayfalar), Ürün Destek Bülteni (5 sayfalar), İşlev Kılavuzu (28 sayfalar)

Epson WorkForce 600 Series Buradan Başlayın Kılavuzu
6

Connect the phone cord

To use the WorkForce 600 Series for faxing, connect the included phone cord
from a telephone wall jack to the LINE port on the WorkForce 600 Series. To
connect a telephone or answering machine, see the Quick Guide for instructions.
Note:
If you're connecting to a DSL phone line, you must use a DSL filter or you won't
be able to fax. Contact your DSL provider for the necessary filter.
7

Choose your connection

Network (wireless or wired)
See your
Network Installation
You can't install your software as
described below.
OR

USB connection

Make sure you have a USB cable (not included).
Then follow the steps below.
USB connection
Follow these steps to connect the WorkForce 600 Series directly to your
computer using a USB cable (not included).
Windows
1
Make sure the WorkForce 600 Series is
NOT CONNECTED to your computer.
Note:
If you see a Found New Hardware
screen, click
USB cable. You can't install your software
that way.
2
Insert the WorkForce 600 Series software CD.
With Windows Vista
window, click Run Epsetup.exe. When you see the
User Account Control screen, click Continue.
3
Click Install and follow the on-screen instructions.
Guide.
Cancel
and disconnect the
, if you see the AutoPlay
®