Epson WorkForce 600 Series Start hier Handleiding - Pagina 5

Blader online of download pdf Start hier Handleiding voor {categorie_naam} Epson WorkForce 600 Series. Epson WorkForce 600 Series 9 pagina's. Using the control panel for wireless network installation
Ook voor Epson WorkForce 600 Series: Handleiding voor netwerkinstallatie (41 pagina's), Gebruikershandleiding (34 pagina's), Gebruikershandleiding (38 pagina's), Cartridges vervangen (2 pagina's), Belangrijke installatie-informatie (2 pagina's), Specificaties (2 pagina's), Product ondersteunings bulletin (5 pagina's), Functiehandboek (28 pagina's)

Connect the phone cord

To use the WorkForce 600 Series for faxing, connect the included phone cord

from a telephone wall jack to the LINE port on the WorkForce 600 Series. To

connect a telephone or answering machine, see the Quick Guide for instructions.

Note:

If you're connecting to a DSL phone line, you must use a DSL filter or you won't

be able to fax. Contact your DSL provider for the necessary filter.

Network (wireless or wired)

See your

Network Installation

You can't install your software as

described below.

Make sure you have a USB cable (not included).

Then follow the steps below.

USB connection

Follow these steps to connect the WorkForce 600 Series directly to your

computer using a USB cable (not included).

Windows

Make sure the WorkForce 600 Series is

NOT CONNECTED to your computer.

Note:

If you see a Found New Hardware

screen, click

USB cable. You can't install your software

that way.

Insert the WorkForce 600 Series software CD.

With Windows Vista

window, click Run Epsetup.exe. When you see the

User Account Control screen, click Continue.

Click Install and follow the on-screen instructions.

Guide.

Cancel

and disconnect the

, if you see the AutoPlay