3Com LANplex 6000 Kurulum Kılavuzu - Sayfa 6

Kablosuz Erişim Noktası 3Com LANplex 6000 için çevrimiçi göz atın veya pdf Kurulum Kılavuzu indirin. 3Com LANplex 6000 16 sayfaları. 11 mbps wireless lan access point 6000
Ayrıca 3Com LANplex 6000 için: Veri Sayfası (2 sayfalar)

Sayfayı Yazdır

TRSM Installation

Installing the TRSM

4 Grasp the inject/eject handles of the module and push them outward as

shown in Figure 2.

Figure 2 Handles in Outward Position

5 Remove the module from the system.

6 Place the module in its antistatic bag.

The installation procedure takes only a few minutes to complete. You need

a small, ﬂat-blade screwdriver.

NOTE: Only the LMM may be inserted in slot one of the LANplex system. The

system will not operate if any other module is inserted into slot one. Slot one

of the LANplex 6004 is the bottom slot, and slot one of the LANplex 6012 is

the ﬁrst slot on the left.

To install the TRSM in an empty slot in the LANplex system, perform the

following steps:

1 Discharge yourself of static electricity by placing the ESD wrist strap on your

wrist and clipping the alligator clip to the mounting screw located next to

the black ground symbol on the system's right mounting bracket. See

Figure 3. If your system does not have mounting brackets, touch the rear

panel.

Module faceplate