ARIES INDUSTRIES SC13 Series Servis ve Yedek Parça Talimatı - Sayfa 5
Dijital Kamera ARIES INDUSTRIES SC13 Series için çevrimiçi göz atın veya pdf Servis ve Yedek Parça Talimatı indirin. ARIES INDUSTRIES SC13 Series 9 sayfaları. Single conductor camera
Sayfayı Yazdır
Introduction
The SC13XX multi-angle camera is specifically designed to provide a close-up view of
sewer pipe walls by utilizing a rotating camera head. The camera head can be outfitted
with lightheads that illuminate the sewer walls as the camera head moves. The SC13XX
can be used in sanitary sewers and storm drains that are between 6 and 120 inches in
diameter.
The camera rotates and pans back and forth, thus increasing efficiency of lateral
connection inspections. When the operator at the control station pushes the "Home" button
on the CCU, the camera head assembly returns to front-center, looking down the pipe.
The camera was designed to be used with a self-propelled mobile transporter. The electric
power and control signals for the camera, its light, and the transporter are transmitted
through a 1/4-inch O.D. single-conductor armored coaxial cable.
Camera Pressurization
The body of the Single Conductor Model SC13XX camera is pressurized at the factory.
This is done with nitrogen to prevent moisture from entering the body and damaging the
internal electronics and/or interfering with their proper operation. The internal pressure is
constantly monitored and can be displayed on the video screen. Whenever the camera
body is opened or its seal is in any way broken, the body must be re-pressurized. Field
pressurization is accomplished using the Nitrogen Pressure Assembly, P/N 150062, which
is included in the
Nitrogen Pressurization Kit, P/N 950011 (not
included).
For further pressurization information, along with the detailed and complete pressurization
procedure, reference Aries Pressurization manual, P/N 970075.
970137_B
www.ariesindustries.com
Page 5