Aeon Labs AEO HEM2-100A Hızlı Başlangıç Kılavuzu - Sayfa 2

Ölçüm Cihazları Aeon Labs AEO HEM2-100A için çevrimiçi göz atın veya pdf Hızlı Başlangıç Kılavuzu indirin. Aeon Labs AEO HEM2-100A 11 sayfaları. Z-wave clamp power meter 2nd generation - two clamps max. 100 ampere

Sayfayı Yazdır

2. Actuators report change of status back to controller

3. Sensors report change of status of measured values to controller

4. Sensors directly control actuators

5. Actuators control other actuators

6. Remote controls send signals to static controllers to trigger scenes or other actions

7. Remote controls control other actuators.

There are two different role a controller can have. There is always one single primary controller that is managing the

network and including/excluding devices. The controller may have other functions - like control buttons - as well. All other

controllers don't manage the network itself but can control other devices. They are called secondary controllers. The

image also shows that its not possible to operate a sensor just from a remote control. Sensors only communicate with

static controllers.

Product description

The Aeon Labs Smart Energy Monitor is a low-cost energy monitor for the entire home. It can wirelessly

report immediate wattage and kWh usage to central control point gateways and can be easily installed.

Installed in an electricity box, the energy meter will monitor the total consumption of electricity used by an

entire building. And its intelligent clamps will report that energy use back to your control point, in watts or

kilowatt-hours, and in real time. So you can see how much electricity you really use and when you use it.

The main body is anchored using a back mount. The device is powered from a normal AC power supply.

The device has two clamps and reports W and kWH (up to 100 Ampere).

Before Device is installed

Please read carefully the enclosed user manual before installation of the radio-actuator, in order to ensure

an error-free functioning.

ATTENTION: only authorized technicians under consideration of the country-specific installation

guidelines/norms may do works with 230?Volt mains power. Prior to the assembly of the product, the

voltage network has to be switched off and ensured against re-switching.

The product is permitted only for proper use as specified in the user manual. Any kind of guarantee claim

has to be forfeited if changes, modifications or painting are undertaken. The product must be checked for

damages immediately after unpacking. In the case of damages, the product must not be operated in any

case. If a danger-free operation of the equipment cannot be assured, the voltage supply has to be

interrupted immediately and the equipment has to be protected from unintended operation.

Aeon Labs AEO HEM2-100A Hızlı Başlangıç Kılavuzu - Sayfa 2

Product description

Installation Guidelines