Pioneer DEH-4800BT Kullanım Kılavuzu - Sayfa 13

Araç Alıcısı Pioneer DEH-4800BT için çevrimiçi göz atın veya pdf Kullanım Kılavuzu indirin. Pioneer DEH-4800BT 20 sayfaları. Cd rds receiver
Ayrıca Pioneer DEH-4800BT için: Kurulum Kılavuzu (33 sayfalar), Hızlı Başlangıç Kılavuzu (33 sayfalar)

Sayfayı Yazdır

Menu Item

BALANCE

EQ SETTING

[SUPER BASS], [POWERFUL],

[NATURAL], [VOCAL], [CUSTOM1],

[CUSTOM2], [FLAT]

Select an equalizer band and

level for further customizing.

Equalizer band: [80HZ], [250HZ],

[800HZ], [2.5KHZ], [8KHZ]

Equalizer level: [+6] to [–6]

LOUDNESS

[OFF], [LOW], [MID], [HI]

SUB.W*2

[NOR], [REV], [OFF]

SUB.W CTRL*2*3

Cut-off frequency: [50HZ],

[63HZ], [80HZ], [100HZ], [125HZ],

[160HZ], [200HZ]

Output level: [–24] to [+6]

Slope level: [–12], [–24]

BASS BOOST

[0] to [+6]

HPF SETTING

Cut-off frequency: [OFF], [50HZ],

[63HZ], [80HZ], [100HZ], [125HZ],

[160HZ], [200HZ]

Slope level: [–12], [–24]

SLA

[+4] to [–4]

*1 Not available when [SUB.W/SUB.W] is selected in [SP-P/O MODE] in the INITIAL settings (page 5).

*2 Not available when [REAR/REAR] is selected in [SP-P/O MODE] in the INITIAL settings (page 5).

Description

Adjust the left and right speaker balance.

Select or customize the equalizer curve.

[CUSTOM1] can be set separately for each source.

However, each of the below combinations are set

to the same setting automatically.

• USB, iPod, ANDROID, and APP (iPhone)

• BT AUDIO, ANDROID, and APP (Android)

[CUSTOM2] is a shared setting used for all

sources.

Compensate for clear sound at low volume.

Select the subwoofer phase.

Only frequencies lower than those in the

selected range are output from the subwoofer.

Select the bass boost level.

Only frequencies higher than the high-pass filter

(HPF) cutoff are output from the speakers.

Adjust the volume level for each source except

FM.

Each of the below combinations are set to the

same setting automatically.

• USB, iPod, ANDROID, and APP (iPhone)

• BT AUDIO, ANDROID, and APP (Android)

*3 Not available when [OFF] is selected in [SUB.W].

SYSTEM settings

You can also access to these menus when the unit is turned off.

Menu Item

LANGUAGE

[ENG](English), [РУС](Russian),

[TUR](Turkish)

CLOCK SET

12H/24H

[12H], [24H]

INFO DISPLAY (Only for DEH-X5800BT)

AUTO PI

[ON], [OFF]

AUX

[ON], [OFF]

USB AUTO

[ON], [OFF]

BT AUDIO

[ON], [OFF]

PW SAVE*

[ON], [OFF]

Description

Select the language to display the text

information from a compressed audio file.

Set the clock (page 4).

Select the time notation.

Display the item on the sub information display.

Select from "SPEANA", "LEVEL METER", "SOURCE",

"CLOCK", and "OFF".

Search for a different station with the same

programming, even if using a preset station.

Set to [ON] when using an auxiliary device

connected to the unit.

Select [ON] to automatically switch to [USB]

source when a USB device/iPod is connected to

the unit.

Select [OFF] when a USB device/iPod is being

connected to the unit just for charging.

Set the Bluetooth signal on/off.

Reduce the battery power consumption.

Turning on the source is the only operation

allowed when this function is on.