Pioneer DVH-340UB Kurulum Kılavuzu - Sayfa 5

Alıcı Pioneer DVH-340UB için çevrimiçi göz atın veya pdf Kurulum Kılavuzu indirin. Pioneer DVH-340UB 41 sayfaları. Dvd rds receiver
Ayrıca Pioneer DVH-340UB için: Hızlı Başlangıç Kılavuzu (17 sayfalar), Kullanım Kılavuzu (45 sayfalar)

Sayfayı Yazdır

Connections

When using a display

connected to video outputs

WARNING

Never install the display in a location where it is

visible to the driver while driving.

Display with

RCA input jacks

To video input

RCA cable

(sold separately)

Video output

(VIDEO OUTPUT)

This product

15 cm

When connecting the

external video component

It is necessary to set V.INPUT to AUX in initial

settings when connecting the external video

component.

External video component

(sold separately)

To video

To audio

output

RCA cable

(sold

RCA cable

separately)

(sold

separately)

Video input

(VIDEO INPUT)

15 cm

This product

Audio input

Installation

Important

! Check all connections and systems before

final installation.

! Do not use unauthorized parts as this may

cause malfunctions.

! Consult your dealer if installation requires

drilling of holes or other modifications to the

vehicle.

! Do not install this unit where:

— it may interfere with operation of the vehicle.

— it may cause injury to a passenger as a result

of a sudden stop.

! The semiconductor laser will be damaged if

it overheats. Install this unit away from hot

places such as near the heater outlet.

! Optimum performance is obtained when the

unit is installed at an angle of less than 30°.

! When installing, to ensure proper heat dis-

persal when using this unit, make sure you

leave ample space behind the rear panel and

wrap any loose cables so they are not block-

ing the vents.

Leave ample

5 cm

space

5 cm

5cm

DIN front/rear mount

This unit can be properly installed using either

front-mount or rear-mount installation.

Use commercially available parts when instal-

ling.

DIN Front-mount

Insert the mounting sleeve into the dash-

board.

For installation in shallow spaces, use the sup-

plied mounting sleeve. If there is enough space,

use the mounting sleeve that came with the ve-

hicle.

Secure the mounting sleeve by using a

screwdriver to bend the metal tabs (90°) into

place.

1 Dashboard

2 Mounting sleeve

Install the unit as illustrated.

1 Nut

2 Firewall or metal support

3 Metal strap

4 Screw

5 Screw (M4 × 8)

Section