Pioneer AVH-P7950DVD Kurulum Kılavuzu - Sayfa 17

Stereo Alıcı Pioneer AVH-P7950DVD için çevrimiçi göz atın veya pdf Kurulum Kılavuzu indirin. Pioneer AVH-P7950DVD 40 sayfaları.

Sayfayı Yazdır

1. Installing the Hide-Away Unit

Installing the hide-away unit

Mounting with Brackets

Tapping screw

(4 mm × 12 mm)

Car mat or chassis

Bracket

Drill 2 mm to 2.5 mm

diameter holes.

Mounting with Hook and Loop Fastner

Thoroughly wipe off the surface before

affixing the hook and loop fastner.

Hide-away unit

Hook and loop fastner

(large) (hard)

Hook and loop fastner

(large) (soft)

Car mat or chassis

DIN Front/Rear-mount

This unit can be properly installed

either from "Front" (conventional DIN

Front-mount) or "Rear" (DIN Rear-

mount installation, utilizing threaded

screw holes at the sides of unit chas-

sis). For details, refer to the following

illustrated installation methods.

Before installing the unit

• Remove the mounting sleeve.

Screw

(4 mm × 8 mm)

DIN Front-mount

Fig. 12

Installation with the rubber bush

1. Decide the position of the side

Fig. 13

(Fig. 14)

Loosen the screws (2 mm × 3 mm)

and then remove the mounting sleeve.

Mounting sleeve

Screw (2 mm × 3 mm)

brackets. (Fig. 15)

When installing in a shallow space,

change the position of side brackets. In

this case, stick concealing tape on

parts that protrude from the dashboard.

Side bracket

Flush surface screw (5 mm × 6 mm)

<CRD4229-A> 17

ENG/MASTER 96 INST

Fig. 14

Concealing tape

Fig. 15