Pioneer VSX-605S Kullanım Talimatları Kılavuzu - Sayfa 29
Stereo Alıcı Pioneer VSX-605S için çevrimiçi göz atın veya pdf Kullanım Talimatları Kılavuzu indirin. Pioneer VSX-605S 37 sayfaları. Audio/video stereo receiver
Ayrıca Pioneer VSX-605S için: Kullanım Talimatları Kılavuzu (37 sayfalar)
Sayfayı Yazdır
SURROUND EDIT OPERATION (cu operation)
@ If you press the SURR EDIT button on a function operation
display, display switches to "SURROUND
EDIT" indications
for the currently selected surround
mode.
(Press the EXIT
button to return to the original function operation display.)
® Onthe SURROUND EDIT display, you can adjust levels, switch
10 the center mode, and adjust delay time.
{When using DOLBY PRO LOGIC)
[LEVEL ADJUSTMENT
__
ii
Example: When using DOLBY PRO LOGIC
1. Press the CENTER MODE
button to select the Center
Mode. (Refer to page 6) +1
eee
—e WIDE
————* PHANTOM
a
2, Press the TEST TONE button to switch the test tone on.
The test tone is output from each of the speakers in the
following order,
'a Front Left —-~-----» Center oat
Surround (Rear) «———--—- Front Right
3. Adjust so that the volume level is the same from each of
the speakers.
® Use the CENTER LEVEL +, ~ buttons to adjust the center
speaker volume level. +3
@
Use the REAR
LEVEL
+, - buttons to adjust the rear
speakers volume level. *4
4. Press the TEST TONE button to switch the test tone OFF.
NOTE:
*1 You can select the CENTER MODE when using DOLBY PRO
LOGIC SURROUND and DOLBY 3CH LOGIC.
When using DOLBY 3CH LOGIC, you can switch between
NORMAL and WIDE settings.
*2 When the CENTER MODE button is PHANTOM position, no
test tone is output from the center speaker.
*3 Only when using DOLBY PRO LOGIC SURROUND and DOLBY
3CH LOGIC, can you adjust the CENTER LEVEL.
*¢ When using DOLBY 3CH LOGIC, the REAR speakers are not
used.
L,
IS C Bish
Coie) |
You can only adjust delay time for DOLBY
PRO LOGIC
SURROUND, SIMULATED SURROUND and ARENA,
Each time you press the +, — buttons, delay time changes as
follows:
18 ms <———*
20 ms <@-——-® 25 ms @—--& 30 ms
The standard setting is 20 ms, but you can select any setting of
your choice.
29
<ARB7059>