Pioneer F-Z92 Kullanım Talimatları Kılavuzu - Sayfa 5
Amplifikatör Pioneer F-Z92 için çevrimiçi göz atın veya pdf Kullanım Talimatları Kılavuzu indirin. Pioneer F-Z92 28 sayfaları. Stereo double cassette tape deck amplifier
Ayrıca Pioneer F-Z92 için: Kullanım Talimatları Kılavuzu (29 sayfalar)
Sayfayı Yazdır
cccereeac
-
CONTENTS
PUT BATTERIES INTO REMOTE CONTROL UNIT
........-.
RELAY RECORDING
20
|
SET-UP FOR OPTIONAL
PL-282/PL-292 TURNTABLE
PARALLEL RECORDING
20
i
|
CONNECTIONS
+¥
COPYING
TAPES
. 20
i
i
ANTENNA
CONNECTIONS
TAPE FADER
2]
|
SURROUND
SYSTEM
...
A.S.E.S. (Auto Synchro Editing System)
PANEL FACILITIES
SLEEP TIMER
.....
TTE TAPES
.
HOW TO HANDLE
CAS
TIMER PLAYBACK
.
1. Open the rear cover.
1.
Check the parts.
2. install size "AAA" (IEC RO3/UM-4) batteries making sure that the
@® €) polarity is correct.
eS
3. Close the cover.
£P adaptor
Platter mat
Platter
(4)
(You will find
this taped on
the cabinet)
2. Pinch belt on inner tim between thumb and forefinger.
3. Slip belt over finger and pull out, inserting finger in hole.
4. Insert finger from top of platter and transfer belt to forefinger.
5. Lower platter onto spindle.
6. Release belt onto pulley.
Cautions for handling batteries.
Misusing batteries can result in electrolyte leakage or explosions. Bear
in mind the following points for getting the most out of your batteries
* When loading the batteries into the battery Compartment, make sure
the plus @
and minus
©
potarities correspond to the markings on
the compartment.
« Even though they rnay be the same
shape, batteries come
with
different vottage ratings. Do not mix or use different types of batteries
together. Use only the same kind of batteries.
* Do not mix up new batteries and used batteries but replace all the
batteries at the same time.
* Do not heat up, disassemble or shortcircuit batteries or throw them
into a fire.
Pulley
'
Correct
Incorrect
7. Place platter mat on platter (with "PIONEER" side up).
8. Remove the vinyl band holding the tonearm.
9. Remove the tonearm from the arm rest.
ada
10. Remove the stylus cover.
S
<ARB1156>