Pioneer Premier PRS-A900 Kullanıcı El Kitabı - Sayfa 13
Amplifikatör Pioneer Premier PRS-A900 için çevrimiçi göz atın veya pdf Kullanıcı El Kitabı indirin. Pioneer Premier PRS-A900 17 sayfaları. Bridgeable four-channel power amplifier
Ayrıca Pioneer Premier PRS-A900 için: Kullanıcı El Kitabı (44 sayfalar), Servis Kılavuzu (41 sayfalar)
Sayfayı Yazdır
Installation
Example of installation on the floor
mat or on the chassis
Replacing the terminal cover
2. Drill 2.5 mm (1/8 in.) diameter holes
at the point marked, and install the
amplifier, either on the carpet or
directly to the chassis.
1. Place the amplifier where it is to be
installed. Insert the supplied tap-
ping screws (4 mm x 18 mm) into
the screw holes. Push on the screws
with a screwdriver so they make
marks where the installation holes
are to be located.
Screw
/
Terminal Cover
l-L
I
Changing the Direction of the Badge
2. Tighten the screw with a 4 mm
hexagonal wrench.
1. To remove the badge, loose screws
by using a 2 mm hexagonal wrench.
2. Change the direction of badge, and
then tighten the screws with a
hexagonal wrench.
1. Align the unit and terminal cover,
and insert the screw.
;' ..
l
Drill a 2.5 mm (1/8 in.)
diameter hole
Tapping screw .
(4 mmxJ8mm)
I.
Floor mat or chassis
Screw
- - - i
•