Pioneer Premier PRS-A900 Manuel du propriétaire - Page 13
Parcourez en ligne ou téléchargez le pdf Manuel du propriétaire pour {nom_de_la_catégorie} Pioneer Premier PRS-A900. Pioneer Premier PRS-A900 17 pages. Bridgeable four-channel power amplifier
Également pour Pioneer Premier PRS-A900 : Manuel du propriétaire (44 pages), Manuel d'entretien (41 pages)
Imprimer la page
Installation
Example of installation on the floor
mat or on the chassis
Replacing the terminal cover
2. Drill 2.5 mm (1/8 in.) diameter holes
at the point marked, and install the
amplifier, either on the carpet or
directly to the chassis.
1. Place the amplifier where it is to be
installed. Insert the supplied tap-
ping screws (4 mm x 18 mm) into
the screw holes. Push on the screws
with a screwdriver so they make
marks where the installation holes
are to be located.
Screw
/
Terminal Cover
l-L
I
Changing the Direction of the Badge
2. Tighten the screw with a 4 mm
hexagonal wrench.
1. To remove the badge, loose screws
by using a 2 mm hexagonal wrench.
2. Change the direction of badge, and
then tighten the screws with a
hexagonal wrench.
1. Align the unit and terminal cover,
and insert the screw.
;' ..
l
Drill a 2.5 mm (1/8 in.)
diameter hole
Tapping screw .
(4 mmxJ8mm)
I.
Floor mat or chassis
Screw
- - - i
•