Aeotec MULTISENSOR 6 Kullanıcı Kılavuzu - Sayfa 7

Aksesuarlar Aeotec MULTISENSOR 6 için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. Aeotec MULTISENSOR 6 13 sayfaları. Z-wave water and flood sensor
Ayrıca Aeotec MULTISENSOR 6 için: Kullanıcı Kılavuzu (13 sayfalar), Manuel (3 sayfalar), Kullanıcı Kılavuzu (8 sayfalar), Manuel (10 sayfalar)

Sayfayı Yazdır

Multisensor 6 user guide : Aeotec Group

With your MultiSensor 6 now a part of your Z-Wave network and having determined its installation location, it's time

to ﬁnish its physical installation. There are 2 ways that your MultiSensor 6 can be mounted on a wall or ceiling. Most

simply it can be placed upon a shelf without the need to attach further accessories. You can mount your sensor in a

corner or against a wall or ceiling by using the Back-Mount Plate. It's also possible to embed your MultiSensor 6

within a ceiling or wall using its Recessor accessory (sold separately).

To install your MultiSensor 6;

Reattach the three parts of your MultiSensor to each other. Unlock the Battery Cover from the Sensor unit.

You may also install your Multisensor 6 on any ﬂat surface area such as tables, and bookshelves;

You can place it upon a shelf without the need to attach further accessories.

To install your MultiSensor 6 with the Back-Mount Plate;

1. You can aﬃx the Back-Mount Arm by Double-Sided Tape or using the provided KA2.5×20 mm screws.

https://aeotec.freshdesk.com/support/solutions/articles/6000057073-multisensor-6-user-guide-

29-09-2020 17:00

Pagina 7 van 13