Whirlpool 3ED27DQ Kullanım ve Bakım Kılavuzu - Sayfa 16

Buzdolabı Whirlpool 3ED27DQ için çevrimiçi göz atın veya pdf Kullanım ve Bakım Kılavuzu indirin. Whirlpool 3ED27DQ 24 sayfaları. No-frost refrigerator-freezers with thirst crusher
Ayrıca Whirlpool 3ED27DQ için: Kullanım ve Bakım Kılavuzu (30 sayfalar), Kullanım ve Bakım Kılavuzu (30 sayfalar)

Sayfayı Yazdır
Bemoving
the base gr
To remove the grille:
1.
Open both doors.
2. Pull base grille forward to release the support
tabs from the metal clips.
3. Do not remove Tech Sheet fastened behind
the grille.
To replace the grille:
1. Line up grille support tabs with metal clips.
2. Push firmly to snap into place.
3. Close the doors.
See cleaning instructions for defrost pan and
condenser coils on page 19.
Ale
Condenser coils
Changing
the light
bulbs
Electrical
Shock Hazard
Before removing a light bulb, either unplug
the refrigerator or disconnect the electricity
leading to it at the main power supply.
Failure to do so could result in personal
injury.
To change refrigerator
light:
1. Disconnect refrigerator from power supply.
2. Reach behind the Control Console to remove
bulb.
3. Replace bulb with a 40-watt appliance bulb.
4. Reconnect refrigerator to power supply.
To change crisper
light:
1. Disconnect refrigerator from power supply.
2. Pull top of light shield forward until it snaps
free.
3. Lower light shield to clear bottom supports.
4. Pull light shield straight out to remove.
5. Replace bulb with a 40-watt appliance bulb.
6. Replace light shield in reverse order.
7. Reconnect refrigerator to power supply.
To change
light below ice bin:
1. Disconnect refrigerator from power supply.
2. Push in sides of light shield until it snaps free
3. Replace bulb with a 40-watt appliance bulb.
4. Replace light shield.
5. Reconnect refrigerator to power supply.
1- '3
/ -=&c&j=-
E
\