Backyard Creations 272-0095 Kullanım ve Bakım Kılavuzu - Sayfa 8

Dış Mekan Mobilyaları Backyard Creations 272-0095 için çevrimiçi göz atın veya pdf Kullanım ve Bakım Kılavuzu indirin. Backyard Creations 272-0095 10 sayfaları. Picnic table kit

Sayfayı Yazdır

STEP 1

Select four 10" x 2" x 4" cleats. Locate and drill two 1/4" diameter holes in each cleat, as shown.

Counterbore each of the holes with a 5/8" bit to a depth of approximately 1/8". This will allow clearance for the carriage bolts in STEP 4.

WHEN INSTALLING

ASSEMBLED SEAT

THIS EDGE OF CLEAT

FACES TABLE TOP

STEP 2 Layout the three seat boards when using 2" x 4"'s (or) two boards when using 2" x 6"'s), best side down on a flatsurface,

maintaining a 1/4" spacing between boards. Measure and mark the following distance from both ends as follows:

MAINTAIN 1/4" SPACE

BETWEEN ALL BOARDS

STEP 3 Insert two 3-1/4" carriage bolts into counterbored holes in cleat.

STEP 4 Nail cleat to seat boards, "trapping" head of carriage bolt between cleat and seat boards,

as shown. Be certain to coat mating surface with glue.

3-1/4" CARRIAGE BOLT

NAIL

SEAT

MARKED LINE

POSITION EDGE OF CLEAT ON MARKED LINE

STEP 5 Repeat STEPS 2 - 4 at other end of seat boards.

STEP 6 Locate the remaining cleats as shown below.

14 3 /4"

15"

16"

10"

21"

20"

STEP 7 Repeat STEPS 1 - 6 for second bench.

10"

1 1 /2"

AT BOTH ENDS OF TABLE

8' SEAT – 10" FROM END

6' SEAT – 6" FROM END

4' SEAT – 4" FROM END

WOODEN CLEAT

FOR 4' TABLE

FOR 6' TABLE

15"

FOR 8' TABLE

21"

10"

SEAT

5 /8"

1 /8"

1 /4"

DRAW ONE LINE

3-1/4" CARRIAGE BOLT

NAILS

SKU 272-0095/FC-30-MN

3-1/4" CARRIAGE BOLT

GLUE

WOODEN CLEAT

09/18