Backyard Creations 272-0095 Kullanım ve Bakım Kılavuzu - Sayfa 9

Dış Mekan Mobilyaları Backyard Creations 272-0095 için çevrimiçi göz atın veya pdf Kullanım ve Bakım Kılavuzu indirin. Backyard Creations 272-0095 10 sayfaları. Picnic table kit

Sayfayı Yazdır

STEP 1 Attach two tubular legs to angle bracket with 2" slotted head screws and 1/4" hex nuts.

STEP 2 Fasten the two tubular legs together with two 2-5/8" slotted head screws, fastening brace between legs through hole, as shown.

BRACE

2-5/8"

SLOTTED

SCREW

SLOTTED

SCREW

STEP 3 Make sure tubular leg assembly is at a right angle(90º) to the table top. Bend brace so that it lays flat against table top.

Locate the point at which hole in brace contacts the table top and drill 1/4" diameter hole, as shown.

Brace may fall on either side of center cleat depending on length of table being assemble. No center cleat used on 4' table.

STEP 4 Attach brace to table top with 2" carriage bolt and hex nut as shown above.

STEP 5 Repeat STEPS 1 - 4 for opposite end of table top.

STEP 6 Turn table over and mount benches to leg assemblies with 1/4" hex nuts.

STEP 7 Tighten all bolts.

MAINTENANCE INSTRUCTIONS:

PERIODICALLY CHECK ALL HARDWARE TO BE SURE BOLTS AND NUTS ARE TIGHT.

FINAL ASSEMBLY

LEG

1/4"

HEX NUT

1/4"

HEX NUT

1/4" HEX NUT

2" CARRIAGE BOLT

1/4" HEX NUT

LEG ASSEMBLY

BRACE

THIS

1/4" HEX NUT

ANGLE

MUST BE

90º

2" CARRIAGE

TABLE

NO CENTER CLEAT ON 4' TABLE

1/4" HEX NUT

SKU 272-0095/FC-30-MN

09/18