AEQ Phoenix Mobile Uygulama Notu - Sayfa 2

Kayıt Ekipmanları AEQ Phoenix Mobile için çevrimiçi göz atın veya pdf Uygulama Notu indirin. AEQ Phoenix Mobile 8 sayfaları. Audio codec system
Ayrıca AEQ Phoenix Mobile için: Uygulama Notu (8 sayfalar)

Sayfayı Yazdır

6. Opens the required ports for audio and signaling. These ports are, by default:

•

SIP signaling PORT (SIP LOCAL PORT): 5060

•

Ports for audio transmission and control (RTP and RTCP protocols): 5004

and 5005, respectively.

•

STUN ports: 3478 & 3479.

2. CONNECTING AND CONFIGURING THE EQUIPMENT

The physical connection will be done to a LAN port.

•

Connect the network cable to the LAN1 port at the back of the AEQ Phoenix

Mobile. Connect the other end to the Ethernet port to the router LAN port.

•

Connect at least a microphone and a pair of headphones to the front audio XLR

connectors of the Phoenix Mobile

•

Connect the power supply cable to the AEQ Phoenix Mobile. If it is equipped

with a battery pack and mains power is not available, you can omit this step.

•

Press the ON button at the left side of AEQ Phoenix Mobile. Verify that the main

display is illuminated.

•

Verify, at the back of the unit, that the green LED at the right of the Ethernet

port starts blinking indicating that the IP connection is active.

•

Configuring the Ethernet port and assignation of Program channel:

Make sure that we are selecting "Program" in the main screen (the one

representing faders and vumeters). At the lower center area you should read

"Program". Also, by pressing MENU we enter the Wizard menu that should

have a PROGRAM legend at the top center area. If COORDINATION appears

instead in any of both places, just press Channel key and channel will be shifted

to PROGRAM.

APLICACIONES ELECTRONICAS QUASAR S.A.

TEL: (34) 91 686 13 00 - FAX: (34) 91 686 44 92 - E-mail: [email protected] - Web: