Alcohawk PT750 Kullanıcı El Kitabı - Sayfa 7

Test Ekipmanları Alcohawk PT750 için çevrimiçi göz atın veya pdf Kullanıcı El Kitabı indirin. Alcohawk PT750 20 sayfaları.

Wait 20 minutes after subject smokes, eats or drinks before test-

ing. Failure to wait 20 minutes can give wrong BAC readings and

damage the sensor.

Step 1) Press and hold the orange ON/OFF power button for 1 second

until you hear a BEEP. The unit reads "Initializing" as it gets

ready for use.

Step 2) The display screen reads "Test" and "Options". To start a "Test",

press the SELECT button. The unit displays "Take a Deep

Breath" for three (3) seconds and then displays "Blow Now".

Take a deep breath, wrap your lips around the new mouth-

piece and blow steadily for five (5) seconds. The unit takes the

breath sample in the amount of time set for a breath sample

(factory default is 5 seconds). Do not cover the BREATH OUT

hole. Begin blowing immediately when "Blow Now" is

displayed to get a deep lung sample.

Note: To perform passive testing see Passive Testing (pg. 6).

Step 3) The unit displays "Processing" while analyzing the sample.

After about three (3) seconds, the unit then displays the

estimated BAC.

Step 4) Display screen shows the test result for 90 seconds before

beeping twice and shutting off. To return to the main menu

press the orange ON/OFF power button.

Step 5) To turn off the unit, press and hold the orange ON/OFF power

button for 1 second.

OPERATION