Alcohawk PT750 Kullanıcı El Kitabı - Sayfa 8

Test Ekipmanları Alcohawk PT750 için çevrimiçi göz atın veya pdf Kullanıcı El Kitabı indirin. Alcohawk PT750 20 sayfaları.

Passive Testing

Passive testing is designed to sample for the presence of alcohol with-

out the use of a mouthpiece. It is for positive or negative tests only and

will not display an estimated BAC.

Step 1) Press and hold the orange ON/OFF power button for 1 second

until you hear a BEEP. The unit reads "Initializing" as it gets

ready for use. If a mouthpiece has been installed remove it

now.

Step 2) The display screen reads "Test" and "Options". Press the

SELECT button to start a test. The unit displays "Take a Deep

Breath" for three (3) seconds and then displays "Blow Now."

Hold the rear intake within 3-4 inches of the subject's

mouth and have the subject exhale towards the rear intake

opening. Press the SELECT button at any point during the

exhale to take a sample.

Step 3) The unit displays "Processing" while analyzing the sample.

After about three (3) seconds, the unit then displays the result.

Step 4) Display screen shows "Negative" or "Positive" for 90 seconds

before beeping twice and shutting off. To return to the main

menu press the orange ON/OFF power button.

Step 5) To turn off the unit, press and hold the orange ON/OFF power

button for 1 second.

Manual Testing

The unit is designed to take an automatic test after the amount of time

set for a breath sample. The unit also has the ability to take a manual

test at any time while blowing.

Step 1) Press and hold the orange ON/OFF power button for 1 second

until you hear a BEEP. The unit reads "Initializing" as it gets

ready for use. If a mouthpiece has been installed remove it

now.

Step 2) The display screen reads "Test" and "Options". To start a "Test",