3Com IntelliJack NJ200 Tamamlayıcı Kılavuz - Sayfa 4
Ağ Donanımı 3Com IntelliJack NJ200 için çevrimiçi göz atın veya pdf Tamamlayıcı Kılavuz indirin. 3Com IntelliJack NJ200 14 sayfaları. Network jacks
Ayrıca 3Com IntelliJack NJ200 için: Yazılım Kılavuzu (7 sayfalar), Veri Sayfası (4 sayfalar)
Sayfayı Yazdır
3 C O M
®
N J 2 0 0 N E T W O R K J A C K — V L A N S & T R A F F I C P R I O R I T I Z AT I O N
Figure 1. The ingress mode is applied to VLAN
traffic coming from the LAN before it gets sent
downstream to the PAN ports. The egress mode is
applied to VLAN traffic coming from the PAN ports
before it gets sent upstream to the LAN.
How the LAN port handles traffic coming from the LAN
NO
802.1 VLAN Tag Set?
Do not modify
Do not modify
tag information
tag information
Forward frame
to PAN port
Figure 2. 3Com Central Configuration Manager
GUI enables point-and-click remote administration
of NJ200 Network Jacks.
4
Inspect
Ethernet
frame
YES
NO
YES
Ingress rule set
to remove tag?
Remove all tag
information
Figure 1 provides a two-key schematic of the traffic-control process, including where
ingress and egress rules are applied. Configuring the ingress and egress modes is
accomplished using 3Com Central Configuration Manager:
1. Open the
Central Configuration Manager
Network Jack and then select
Property
and select
How the LAN port handles traffic coming from the PAN
NO
802.1 VLAN Tag Set?
YES
NO
Egress rule set
to add tag?
Do not modify
Add VLAN tag
information
tag information
. From the list of devices, select an NJ200
Property
. You can also right-click on its IP address
from the menu.
Inspect
Ethernet
frame
YES
Do not modify
tag information
Forward frame
to PAN port