Xerox 220 Taramaya Genel Bakış

Yazıcı Xerox 220 için çevrimiçi göz atın veya pdf Taramaya Genel Bakış indirin. Xerox 220 2 sayfaları. Scanning services
Ayrıca Xerox 220 için: Hızlı Kurulum (1 sayfalar), Hızlı Kurulum Kılavuzu (8 sayfalar), Başlarken (48 sayfalar)

Sayfayı Yazdır

DC220/230ST Scanning Overview

Hints and Tips

rior

to performing the initial scan job, verify the following from your

workstation:

•

The DC220/230 user account and password are correct.

•

The correct rights to the Document Repository have been assigned to

the DC220/230.

•

The Confirmation Sheet option is enabled. This provides details of

each scan job, including status, filing location, filing policy and scan

settings.

can confirm that a scan job was completed successfully by verify-

ing that the number of pages scanned is the same as the number of files

stored in the Repository for that job.

default directory created for each scan job is NETSCAN.XSM,

unless the Filing Policy, New Auto Generate, is used. In this case, your

files will be located in the DDHHMMSS.XSM directory. This directory is

created by the DC220/230 using a time stamp from when the job was

created. DD represents the date, HH represents the hour, MM represents

the minutes, and SS represents the seconds.

THE DOCUMENT COMPANY

701P98227 Version 1.1, 5-98

XEROX

DC220/230ST Scanning Overview

Scan

Job

NCP or FTP

TIFF

How Scanning Works

The DC220/230 enables you to scan hard copy documents and create electronic Tagged Image File Format

(TIFF) files, which are sent to a Document Repository on a file server. The TIFF files can be retrieved at a

user' s local workstations. All pages of a multi-page document are scanned prior to the job being sent to the

Document Repository. A TIFF file is created for each page scanned. If the filing process fails, the job is

deleted from the DC220/230.

A user scans a document at the DC220/230 after selecting a template from

the Touch Screen. Templates define the Directory and the Document Folder

on the server where the file will be stored. Templates also define the Image

Quality setting, the Original Size, the number of Sides Imaged, and the

Scan Resolution. A default template is automatically created during installa-

tion. A System Administrator can create new templates. The template val-

ues can be viewed on the Touch Screen by selecting the template.

After each page has been scanned and converted to a TIFF file, the DC220/

230 logs into the Document Repository and sends the TIFF files to the loca-

tion specified in the template. A numbering scheme (such as 00000001,

00000002, 00000003) is applied to each file. The DC220/230 then logs out

of the Document Repository.

The user retrieves the TIFF files (using Visioneer PaperPort

ware that can edit TIFF images) from the Document Repository.

Note: The method used at a workstation to access the Document Repository and the method used at the

DC220/230 to send the documents are independent. For instance, the DC220/230 may file the TIFF images

using FTP to an NT Server; the workstation may retrieve the images using NetBIOS/NetBEUI.

THE DOCUMENT COMPANY

Server

Document

Client

Repository

Manual Retrieval

, or other soft-

XEROX