Caleg WOWMAKER 9003305 Hızlı Başlangıç Kılavuzu

Endüstriyel Ekipmanlar Caleg WOWMAKER 9003305 için çevrimiçi göz atın veya pdf Hızlı Başlangıç Kılavuzu indirin. Caleg WOWMAKER 9003305 2 sayfaları.

WOWMAKER Suspension with Eye Bolts

General

According to static calculations the WOWMAKER may only be suspended using the

Information

following eye bolts

Item number:

9003305

Supplier:

caleg Schrank und Gehäusebau GmbH, Zum Gerlen 1, D-66131 Saarbrücken,

Phone +49 6893 89200, Fax +49 6893 89262, Mail [email protected]

The static analysis is limited to the load distribution in the supporting structure. The load may only be applied

vertically - oblique tensile forces are not permitted (if necessary, a cross beam must be used).

Dead load:

The dead load of the frame is 210 kg (2.1 kN) – without the Studiolifter.

Screw

connection:

With a hex key. The eye bolt remains rotatable after fastening.

Use:

Inside buildings only.

Wind load:

None.

ATTENTION: The hoist must be designed so that the increase in load caused by lifting does not

exceed the factor fdyn 0 3.

ATTENTION: The bolt screws must be screwed at least 10 mm into the suspension blocks. (flat on

the frame).