Xerox Phaser PX Phaser PXi Phaser II PX Phaser II PXi Phaser II PXe Phaser II SX Talimat Sayfası - Sayfa 23
Yazıcı Xerox Phaser PX Phaser PXi Phaser II PX Phaser II PXi Phaser II PXe Phaser II SX için çevrimiçi göz atın veya pdf Talimat Sayfası indirin. Xerox Phaser PX Phaser PXi Phaser II PX Phaser II PXi Phaser II PXe Phaser II SX 25 sayfaları. 4-mbyte ram simm installation
Sayfayı YazdırPhaser 200i and Phaser 200e
1.
Power down the printer. Leave the power cord plugged in to provide
a ground path for static. Remove the interface cables.
2.
Remove the top-rear and rear cabinet panels.
3.
Remove the screws securing the I/O board to the card cage.
4.
Disconnect the I/O board ribbon cable(s) from the image processor
board. The Phaser 200i's I/O board has two ribbon cables; the Phaser
200e's I/O board has one ribbon cable. Remove the I/O board.
Phaser 200i
I/O board
Phaser 200e
I/O board
4-Mbyte RAM SIMM Installation — (4690F4M)
3
4
3
4
23
31442-02A