Xerox Phaser PX Phaser PXi Phaser II PX Phaser II PXi Phaser II PXe Phaser II SX Talimat Sayfası - Sayfa 25

Yazıcı Xerox Phaser PX Phaser PXi Phaser II PX Phaser II PXi Phaser II PXe Phaser II SX için çevrimiçi göz atın veya pdf Talimat Sayfası indirin. Xerox Phaser PX Phaser PXi Phaser II PX Phaser II PXi Phaser II PXe Phaser II SX 25 sayfaları. 4-mbyte ram simm installation

Sayfayı Yazdır

Phaser 200e: Insert a memory module in connector J6 (a), and tilt the

module upright until it locks in place (b).

When properly inserted, a tab on each end of the connector slips into a

hole on each end of the RAM SIMM. Also, a pawl on each end of the

connector latches around each end of the RAM SIMM to lock it in

place.

Phaser 200i: Insert a memory module in connector J6 (or in J7 if J6 is

already ﬁlled) (a), and tilt the module upright until it locks in place

(b).

When properly inserted, a tab on each end of the connector slips into a

hole on each end of the RAM SIMM. Also, a pawl on each end of the

connector latches around each end of the RAM SIMM to lock it in

place.

Phaser 200i only. Repeat Step 8 to install an additional memory

module in J7 if a second SIMM is available.

10.

Reinstall the image processor board in the card cage.

11.

Reinstall the I/O board.

12.

Close and secure the card cage top. Reinstall the rear cabinet panels.

13.

Reconnect the host interface cables. Turn on the printer and make a

print to verify that the printer functions correctly.

4-Mbyte RAM SIMM Installation — (4690F4M)

RAM

SIMMs

8699-65