Xerox Versant 80 Press Müşteri Beklentileri ve Kurulum Kılavuzu - Sayfa 40

Yazıcı Xerox Versant 80 Press için çevrimiçi göz atın veya pdf Müşteri Beklentileri ve Kurulum Kılavuzu indirin. Xerox Versant 80 Press 48 sayfaları. Entry production color presses
Ayrıca Xerox Versant 80 Press için: Güvenlik Kılavuzu (26 sayfalar), Güvenlik Kılavuzu (45 sayfalar)

Sayfayı Yazdır

Xerox Versant 80 Press Müşteri Beklentileri ve Kurulum Kılavuzu

Installation

Optional Devices Chart

The following table lists the number of ADDITIONAL plates required

for the various optional devices. The number of plates listed does NOT

include the base press configuration.

NOTE:

The Interface Module is required with any system configuration that

has one or more finishing device, except the Offset Catch Tray (OCT) and

the BR Finishers.

Optional feeding / finishing device

High Capacity Feeder (HCF)

(letter size)

1-tray Oversized High Capacity Feeder (OHCF)

Advanced High Capacity Feeder (Advanced HCF)

BR Finisher

BR Booklet Finisher

Interface Module + GBC AdvancedPunch

Interface Module + High Capacity Stacker (HCS)

Interface Module + Standard Finisher (without C/Z

Folder)

Interface Module + Standard Finisher + C/Z Folder

Interface Module + Booklet Maker Finisher (without

C/Z Folder)

Interface Module + Booklet Maker Finisher + C/Z

Folder

SquareFold Trimmer Module

Standard Finisher Plus* without C/Z Folder

*Includes Finisher Module and Finishing Transport

Standard Finisher Plus* with C/Z Folder

*Includes Finisher Module and Finishing Transport

2-Knife Trimmer

Electrical Requirements

All machine optional accessories and print servers should be placed within

6 feet (3 meters) of wall outlets. Ensure that there are enough wall outlets

available for optional accessories and the print server.

Press Electrical Requirements

Electrical requirements must be satisfied prior to equipment delivery. The

Press requires a dedicated 20 Amp service.

Item

Main processor

Nominal Voltage

 North America (NA): 208-240 VAC (XC) -

10%/+6%

 Europe: 220-240 VAC (XE) ±10%

Amperage circuit

20*

*Requires a 20 circuit and receptacle

Current rating

Cycles

50/60 Hz Single Phase

Frequency (Hz)

 NA: 50/60 ±3%

 Europe: 50 ±3%

In rush current

 100A or less

Customer Expectation and Installation Guide

Item

Power

consumption

Power Cord Length

Plug/Receptacle

Diagram

Required

Mobility Kits

1 kit

2 kits

1 kit

1 Kit

3 kits

2 kits

Electrical Requirements for Optional Devices

3 kits

NOTE:

and require no additional power receptacle.

NOTE:

1 kit

the customer.

3 kits

International Requirements

Each optional feeding and finishing device requires an additional 100-

4 kits

240 VAC or 208-240 VAC country-specific power receptacles.

USA Requirements

2 kits

Each optional feeding and finishing device requires one additional

NEMA 5-15R or 5-20R receptacle; refer to the following diagram and

table.

Item

Current/run power

Voltage (VAC)

Power cord

length

Receptacle NEMA

part number

NOTE:

the customer.

Xerox Confidential

Main processor

 NA: 208V, 3.66KW or less

 NA: 240V, 4.224KW or less

 Europe: 220V, 4.4KW or less

 Europe: 240V, 4.8KW or less

10 feet/3 meters

 North America Plug: NEMA 6-20P

 North America Receptacle: NEMA 6-20R

A single power cord (USA plug and receptacle

diagram shown above) is required for the

press.

 Europe: PCE Shark 023-6 Plug

 Europe: receptacle that mates to the PCE Shark

023-6 plug

HCF, BR Finisher, and BR Booklet Finisher plug directly into press

Use surge protection only as required and is the responsibility of

1-Tray OHCF / Advanced HCF

1-Tray OHCF – 100-120V 2.5A, 220-240V 1.5A

Advanced HCF – 100-120V 5A, 220-240V 3A

Use surge protection only as required, and it is the responsibility of

Xerox

Versant® ™ 80 Press

3 amps/65 watts

8.2 feet/2.5 meters

5-15R or 5-20R