Xerox WorkCentre M24 Color Hızlı Başlangıç Kılavuzu

Yazıcı Xerox WorkCentre M24 Color için çevrimiçi göz atın veya pdf Hızlı Başlangıç Kılavuzu indirin. Xerox WorkCentre M24 Color 2 sayfaları. Creating mailbox
Ayrıca Xerox WorkCentre M24 Color için: Hızlı Bağlantı Kılavuzu (4 sayfalar), Hızlı Başlangıç Kılavuzu (4 sayfalar), Broşür ve Teknik Özellikler (4 sayfalar), Hızlı Başlangıç Kılavuzu (4 sayfalar), Hızlı Başlangıç Kılavuzu (2 sayfalar), Hızlı Başlangıç Kılavuzu (4 sayfalar), Hızlı Başlangıç Kılavuzu (2 sayfalar), Hızlı Başlangıç Kılavuzu (2 sayfalar), Hızlı Başlangıç Kılavuzu (2 sayfalar)

Xerox WorkCentre M24 Color Hızlı Başlangıç Kılavuzu
Online
Indicator lights when data is
being received from a client.
Job Memory
Indicator lights when data is
stored in the machine's memory.
Features
Allows you to display features settings to pro-
gram a copy job. It also allows you to alternate
between scanning and copying feature screens.
Job Status
Allows you to check or cancel jobs currently
executing, or to check or print saved documents.
Machine Status
Allows you to check the
machine status, meters, the state of
consumables, and output reports.
Access
Use this administrator level feature to change machine default settings,
and to setup or modify user accounts.
Speed
Dialing
Enter # and a two
digit number using
Pause
numeric keypad.
One pause is three
seconds. You can
Clear
enter pauses of six
Clears an incorrect
seconds, nine
numeric.
seconds, etc. by
additional button
presses
Numeric Keypad
Is used to enter copy quantity or other numeric information.
Control Panel - 1 of 2
Power Saver
Lights up green and is initiated automatically if the machine is left idle
for a specific amount of time. Press the Power Saver button to bring
the machine back to full power after the warm-up period.
Clear All
Returns the machine to the original Default State. When the Clear All
button is selected in Interrupt mode, default settings are applied only to
the interrupting job.
Interrupt
Stops the printer/copier during the current job. This allows another job
to be run.
Stop
Pressing Stop will halt the copy job in process at the completion of the
current activity. A message asking if you want to press Start to contin-
ue the job or Clear All to cancel the job is displayed on the Touch
Screen.
Start
Initiates a job or continues the copying
process.