Xerox Phaser 5335 Kurulum Kılavuzu - Sayfa 3

Yazıcı Aksesuarları Xerox Phaser 5335 için çevrimiçi göz atın veya pdf Kurulum Kılavuzu indirin. Xerox Phaser 5335 17 sayfaları. Network expansion card
Ayrıca Xerox Phaser 5335 için: Teknik Özellikler (2 sayfalar), Kurulum Kılavuzu (2 sayfalar)

Sayfayı Yazdır

Pull the rear cover forward and remove it

from the printer.

Loosen the three screws that secure the

metal plate cover inside the printer.

Pull the metal plate cover forward and

remove it from the printer.

Align the connector of the network

expansion card with the card connector

(located at the left of the controller board)

and insert the card into the connector.

Important

• The connector at the right of the controller board is for

an internal hard disk (optional). Make sure to insert the

network expansion card into the correct connector.

Push the network expansion card as shown

in the figure and firmly insert it into the

connector. You may need to wiggle the

board slightly to get it to seat properly.

Card connector