Xerox Versant 280 Press Manuel - Sayfa 27

Yazıcı Aksesuarları Xerox Versant 280 Press için çevrimiçi göz atın veya pdf Manuel indirin. Xerox Versant 280 Press 44 sayfaları. Customized envelope feeder
Ayrıca Xerox Versant 280 Press için: Hızlı Başlangıç Kılavuzu (44 sayfalar)

Sayfayı Yazdır
Xerox Versant 280 Press Manuel
 

REP 4.8 Separator Adjustment Procedure

Overview
The gate assembly pre-shingles the product to help the feed belts move one piece of product
at a time based on the gap between the gate assembly and the feed belts. Pre-shingling helps
the gate to efficiently separate and single-out the product. The gap between the gate and the
feed belts is adjustable to accommodate different product thicknesses.
The discharge belts are located under the hold down assembly.
Combined with the hold down assembly, the discharge belts provide the friction necessary to
pull the piece of product away from the gate assembly, resulting in a gap between each piece
of product as it leaves the gate assembly area.
When feeding product with varying thickness throughout a single piece of product, it may be
necessary to loosen both adjustment rollers one or two full turns allowing the gate to "float."
Purpose
Adjust the gate assembly so only a single piece of product at a time passes under the gate.
Procedure
1.
Turn the power switch to O (off) and remove the power cord from the power source.
2.
Turn the gate assembly adjustment knob to raise or lower the gate assembly to create
a gap greater than the thickness of one piece of product.
 
Xerox Customized Envelope Feeder – Problem Solving Guide
4-9