Xerox Versant 280 Press Посібник - Сторінка 27
Переглянути онлайн або завантажити pdf Посібник для Аксесуари для принтерів Xerox Versant 280 Press. Xerox Versant 280 Press 44 сторінки. Customized envelope feeder
Також для Xerox Versant 280 Press: Посібник із швидкого старту (44 сторінок)
Друкувати сторінку
REP 4.8 Separator Adjustment Procedure
Overview
The gate assembly pre-shingles the product to help the feed belts move one piece of product
at a time based on the gap between the gate assembly and the feed belts. Pre-shingling helps
the gate to efficiently separate and single-out the product. The gap between the gate and the
feed belts is adjustable to accommodate different product thicknesses.
The discharge belts are located under the hold down assembly.
Combined with the hold down assembly, the discharge belts provide the friction necessary to
pull the piece of product away from the gate assembly, resulting in a gap between each piece
of product as it leaves the gate assembly area.
When feeding product with varying thickness throughout a single piece of product, it may be
necessary to loosen both adjustment rollers one or two full turns allowing the gate to "float."
Purpose
Adjust the gate assembly so only a single piece of product at a time passes under the gate.
Procedure
1.
Turn the power switch to O (off) and remove the power cord from the power source.
2.
Turn the gate assembly adjustment knob to raise or lower the gate assembly to create
a gap greater than the thickness of one piece of product.
Xerox Customized Envelope Feeder – Problem Solving Guide
4-9