Xerox WORKCENTRE C2424 Kullanıcı Kılavuzu - Sayfa 7

Yazılım Xerox WORKCENTRE C2424 için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. Xerox WORKCENTRE C2424 43 sayfaları. Copier-printer
Ayrıca Xerox WORKCENTRE C2424 için: Hızlı Referans Kılavuzu (14 sayfalar), Broşür (8 sayfalar), Tamamlayıcı Kılavuz (7 sayfalar), Teknik Özellikler (6 sayfalar), Başlangıç Kılavuzu (26 sayfalar), Kullanıcı Kılavuzu (21 sayfalar), Kullanıcı Kılavuzu (20 sayfalar), Bakım Kılavuzu (20 sayfalar), Kullanıcı Kılavuzu (19 sayfalar), Talimatlar Kılavuzu (16 sayfalar), Manuel (12 sayfalar), Talimatlar Kılavuzu (6 sayfalar), Kurulum Kılavuzu (4 sayfalar), Kurulum Kılavuzu (2 sayfalar), Besleme Silindiri Kitinin Değiştirilmesi (2 sayfalar), Kurulum Kılavuzu (2 sayfalar), Gönüllü Ürün Erişilebilirlik Şablonu (10 sayfalar), Rekabetçi Karşılaştırma (3 sayfalar), Hızlı Referans Kılavuzu (14 sayfalar), Servis Kılavuzu (11 sayfalar), Hızlı Referans Kılavuzu (13 sayfalar)

Sayfayı Yazdır

Xerox WORKCENTRE C2424 Kullanıcı Kılavuzu

Using Host Names with the Domain Name Service (DNS)

The system supports DNS through an embedded DNS resolver. The DNS resolver protocol

communicates with one or more DNS servers to resolve the IP address for a given host name

or the host name for a given IP address.

To use an IP host name for the system, the system administrator must configure one or more

DNS servers and a local DNS domain name space database. To set up the system for DNS,

supply a maximum of two DNS name server IP addresses.

Dynamic Domain Name Service (DDNS)

The system supports Dynamic DNS through DHCP. You must have DHCP enabled on the

system for DDNS to function. Your network's DHCP server must also support Dynamic DNS

updates through option 12 or option 81 support. See your network administrator for details.

Launch your web browser.

Enter the system's IP address in the browser's Address field (http://xxx.xxx.xxx.xxx).

Select Properties.

Select the Protocols folder on the left sidebar.

Select TCP/IP.

In the BOOTP/DHCP Settings section, set the BOOTP/DHCP option to ON.

To enable DDNS, enter the following DDNS/WINS settings information:

DDNS - Set to ON.

■

Release Host Name - Set to NO.

■

DDNS/WINS Name - Use the default name provided by Xerox or enter another name.

■

Primary WINS Server (optional)

Secondary WINS Server (optional)

■

Click Save Changes when you are finished entering the settings.

Manually Setting the System's IP Address

Ensure that your computer has a properly configured IP address for your network. Contact

your network administrator for more information.

If you are on a network without a DNS server, or in an environment where the network

administrator assigns system IP addresses, you can use this method to manually set the IP

address. Manually setting the IP address overrides DHCP and AutoIP. Alternatively, if you are

in a small office with a single PC and use a dialup modem connection, you can manually set

the IP address.

On the control panel, press the System Setup button.

Select

Connection

Select

Network

Setup, then press the Enter button.

TCP/IP

Setup, then press the Enter button.

Select

Select DHCP/BOOTP, then press the Enter button until the control panel displays Off.

Select

TCP/IP

Address, then press the Enter button.

Enter the system's IP address, then press the Enter button.

Connections and Internet Protocol (TCP/IP)

Setup, then press the Enter button.

WorkCentre® C2424 Copier-Printer

6-7