Xerox WORKCENTRE C2424 사용자 설명서 - 페이지 7

{카테고리_이름} Xerox WORKCENTRE C2424에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Xerox WORKCENTRE C2424 43 페이지. Copier-printer
Xerox WORKCENTRE C2424에 대해서도 마찬가지입니다: 빠른 참조 매뉴얼 (14 페이지), 브로셔 (8 페이지), 보충 설명서 (7 페이지), 사양 (6 페이지), 시작하기 매뉴얼 (26 페이지), 사용자 설명서 (21 페이지), 사용자 설명서 (20 페이지), 유지 관리 매뉴얼 (20 페이지), 사용자 설명서 (19 페이지), 사용 설명서 (16 페이지), 매뉴얼 (12 페이지), 사용 설명서 (6 페이지), 설치 매뉴얼 (4 페이지), 설치 매뉴얼 (2 페이지), 피드 롤러 키트 교체 (2 페이지), 설정 매뉴얼 (2 페이지), 자발적 제품 접근성 템플릿 (10 페이지), 경쟁사 비교 (3 페이지), 빠른 참조 매뉴얼 (14 페이지), 서비스 매뉴얼 (11 페이지), 빠른 참조 매뉴얼 (13 페이지)

페이지 인쇄

Using Host Names with the Domain Name Service (DNS)

The system supports DNS through an embedded DNS resolver. The DNS resolver protocol

communicates with one or more DNS servers to resolve the IP address for a given host name

or the host name for a given IP address.

To use an IP host name for the system, the system administrator must configure one or more

DNS servers and a local DNS domain name space database. To set up the system for DNS,

supply a maximum of two DNS name server IP addresses.

Dynamic Domain Name Service (DDNS)

The system supports Dynamic DNS through DHCP. You must have DHCP enabled on the

system for DDNS to function. Your network's DHCP server must also support Dynamic DNS

updates through option 12 or option 81 support. See your network administrator for details.

Launch your web browser.

Enter the system's IP address in the browser's Address field (http://xxx.xxx.xxx.xxx).

Select Properties.

Select the Protocols folder on the left sidebar.

Select TCP/IP.

In the BOOTP/DHCP Settings section, set the BOOTP/DHCP option to ON.

To enable DDNS, enter the following DDNS/WINS settings information:

DDNS - Set to ON.

■

Release Host Name - Set to NO.

■

DDNS/WINS Name - Use the default name provided by Xerox or enter another name.

■

Primary WINS Server (optional)

Secondary WINS Server (optional)

■

Click Save Changes when you are finished entering the settings.

Manually Setting the System's IP Address

Ensure that your computer has a properly configured IP address for your network. Contact

your network administrator for more information.

If you are on a network without a DNS server, or in an environment where the network

administrator assigns system IP addresses, you can use this method to manually set the IP

address. Manually setting the IP address overrides DHCP and AutoIP. Alternatively, if you are

in a small office with a single PC and use a dialup modem connection, you can manually set

the IP address.

On the control panel, press the System Setup button.

Select

Connection

Select

Network

Setup, then press the Enter button.

TCP/IP

Setup, then press the Enter button.

Select

Select DHCP/BOOTP, then press the Enter button until the control panel displays Off.

Select

TCP/IP

Address, then press the Enter button.

Enter the system's IP address, then press the Enter button.

Connections and Internet Protocol (TCP/IP)

Setup, then press the Enter button.

WorkCentre® C2424 Copier-Printer

6-7