Xerox WorkCentre M118 Yazılım Kılavuzu - Sayfa 16

Yazılım Xerox WorkCentre M118 için çevrimiçi göz atın veya pdf Yazılım Kılavuzu indirin. Xerox WorkCentre M118 47 sayfaları. Drum cartridge remanufacturing
Ayrıca Xerox WorkCentre M118 için: Kullanıcı Kılavuzu (2 sayfalar), Modül Kılavuzu (2 sayfalar), Hızlı Kurulum Kartı (2 sayfalar), Hızlı Kurulum Kılavuzu (5 sayfalar), Hızlı Kurulum Kılavuzu (5 sayfalar), Manuel (28 sayfalar), Stand Kurulum Kılavuzu (4 sayfalar), Kurulum Kılavuzu (2 sayfalar), Kurulum Kılavuzu (2 sayfalar), Kurulum Kılavuzu (2 sayfalar), Kurulum Kılavuzu (2 sayfalar), Kurulum Kılavuzu (2 sayfalar), Kurulum Kılavuzu (1 sayfalar), Kurulum Kılavuzu (1 sayfalar), Başlangıç Kılavuzu (25 sayfalar), Değerlendirici El Kitabı (12 sayfalar), Servis Kılavuzu (12 sayfalar), Yeniden Üretim Talimatları (14 sayfalar)

3 Operation with Windows NT 4.0

Hardware/Software Requirements

The minimum system requirements for the Windows NT 4.0 printer driver are described

below.

Personal computer on which the Windows NT 4.0 operating system can operate.

Windows NT Workstation 4.0/Windows NT Server 4.0 (Service Pack 6a or later)

Install the AdobePS 5.2.2 printer driver onto Windows NT by following the procedure

below.

It is possible to cancel installation of the printer driver by clicking [Cancel] in the dialog

box displayed during installation. You can also click [Back] to delete the settings in that

dialog box and return to the previous dialog box.

Start Windows NT 4.0.

NOTE: Log on as a Power User group member or an Administrator. Refer to the

Windows NT 4.0 documentation for details about the Power User group.

On the Start menu, point to Settings and click [Printers].

In the Printer window, double-click [Add Printer].

Select how the printer is connected to the computer and click [Next]. Select [My

Computer] if the printer is connected directly to the computer or to the network in

the TCP/IP(LPD) environment. Select [Network printer server] in other cases. The

following is an example of a local printer.

NOTE: Specify the target printer in the Connect to Printer dialog box if you selected

[Network printer server].

Select the port you are using and click [Next].

Insert the PostScript Driver Library CD-ROM in the CD-ROM drive.

Click [Have Disk].

Enter "Drive Name:\English\PrinterDriver\NT40" in the "Copy manufacturer's files

from:" box and click [OK].

In this guide, we have used "E:" as the CD-ROM drive. If you are using a different

drive for the CD-ROM, specify accordingly.

NOTE: Click [Browse] to specify a folder on the CD-ROM.

Xerox WorkCentre 118 Postscript® User Guide