Xerox Phaser 6100DN Başlangıç Kılavuzu - Sayfa 30

Yazdırma Sunucusu Xerox Phaser 6100DN için çevrimiçi göz atın veya pdf Başlangıç Kılavuzu indirin. Xerox Phaser 6100DN 37 sayfaları. Disk overwrite installation and usage
Ayrıca Xerox Phaser 6100DN için: Kurulum Kılavuzu (34 sayfalar), Teknik Özellikler (2 sayfalar), Kullanıcı Kılavuzu (32 sayfalar), Broşür ve Teknik Özellikler (4 sayfalar), Kullanıcı Kılavuzu (28 sayfalar), Kurulum Kılavuzu (2 sayfalar), Güvenlik Kılavuzu (38 sayfalar), Kurulum Kılavuzu (2 sayfalar), Yayın Notu (2 sayfalar), Manuel (34 sayfalar), Manuel (34 sayfalar), Başlangıç Kılavuzu (34 sayfalar), Kullanıcı Kılavuzu (32 sayfalar), Kurulum ve Kullanım Kılavuzu (8 sayfalar)

DOCUSP 4.1

Changing the Retain PDL Setting

Perform the following steps to modify the number of PDLs that

can be retained on the DocuSP.

1. On the DocuSP interface, select Setup and System

Preferences. Select the Job Policy tab.

2. Ensure that the setting for Retain PDL files of last 50 jobs is

set as enabled.

3. Select [OK]. Do not restart the system if you are prompted to

do so.

4. In the background, right-click to open the menu. Open a

terminal window.

5. Login as root user.

6. Type: /opt/XRXnps/bin/setretainPDL # and press <Enter>,

where # is a number between 1 and 100. A value of 0

maintains the current setting.

7. Close the terminal window. Restart the DocuSP software.

Perform the following to reset the spectrophotometer:

Ensure that the calibration strip that matches the serial number

on the spectrophotometer is available. If not, order a new one

before continuing.

1. On the DocuSP controller background menu, open a

terminal window.

2. At the % prompt, type:

cd /opt/XRXnps/XRXcalLib/bin

3. From the % prompt, type:

. /resetDTP

This will restore the spectrophotometer to the factory default

settings.

After the reset is complete, follow the standard procedure to

calibrate the spectrophotometer using the Xrite calibration strip.

XEROX DOCUMENT SERVICES PLATFORM SERIES

GETTING STARTED