Alderon Industries VertiMAC VM13 Series Kullanıcı Kılavuzu - Sayfa 5

Anahtar Alderon Industries VertiMAC VM13 Series için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. Alderon Industries VertiMAC VM13 Series 20 sayfaları. Pump switch

Sayfayı Yazdır

Features

Refer to the illustration below to reference the feature descriptions provided.
1
6
(1) VertiMAC™ Pump Switch Housing - Magnetically
activated switching mechanism encapsulated in epoxy to
ensure a waterproof switch.
(2) Actuator Pin - Connects the actuator rod to the pump
switch housing to ensure proper activation of the switching
mechanism.
(3) Actuator Rod - Activates or deactivates the mechanism
inside the pump switch housing as the float rises or lowers
on the rod.
(4) Float - Slides up and down the actuator rod to turn the
pump on and off.
(5) Rubber Grommet - Placed on the actuator rod at the
determined location for desired pump differential.
VertiMAC™ Pump Switch - USER GUIDE
6
9
2
7
3
4
5
(6) Pipe Clamp Bracket - Pre-installed, attaches to the pump
switch housing and used to mount the VertiMAC™ pump
switch to a pipe.
(7) Stainless Steel Pipe Clamp - Attaches to the pipe clamp
bracket and secures the VertiMAC™ pump switch to a pipe at
the desired mounting location.
(8) Pump Switch Power Cable (not shown) - Available in
120VAC or 240VAC, bare lead (no plug) or piggyback plug, 13
Amp models.
(9) QR Code - Scan code which directs you to alderonind.com
where additional information can be found for the VertiMAC™
pump switch.
Alderon Industries™ - Leading Edge Control Products | 5