Yamaha Clavinova CLP-157 Kullanıcı El Kitabı - Sayfa 25

Müzik Enstrümanı Yamaha Clavinova CLP-157 için çevrimiçi göz atın veya pdf Kullanıcı El Kitabı indirin. Yamaha Clavinova CLP-157 39 sayfaları. Yamaha clavinova owner's manual

Sayfayı Yazdır

MIDI Functions

The MIDI functions listed to the right are engaged by

holding down the [MIDI/TRANSPOSE] button and press-

ing the corresponding voice selector. Full details are given

in the following pages.

Local Control ON/OFF

"Local Control" refers to the fact that, normally, the Clavinova keyboard controls its internal tone generator,

allowing the internal voices to be played directly from the keyboard. This situation is "Local Control ON" since

the internal tone generator is controlled locally by its own keyboard.

Local control can be turned OFF, however, so that the Clavinova keyboard does not play the internal voices,

but the appropriate MIDI information is still transmitted via the MIDI OUT connector when notes are played on

the keyboard. At the same time, the internal tone generator responds to MIDI information received via the MIDI

IN connector.

When using the DOU-10 Disk Orchestra Unit with the Clavinova, for example, Local Control should be

turned OFF when recording using the DOU-10 voices only, and ON when recording the Clavinova voices while

listening to playback of the DOU-10 voices.

MIDI/

PIANO 1

TRANSPOSE

PIANO 1

= Local Control OFF

PIANO 1

= Local Control ON

Program Change ON/OFF

Normally the Clavinova will respond to MIDI program change numbers received from an external keyboard

or other MIDI device, causing the correspondingly numbered Clavinova voice to be selected. The Clavinova

will normally also send a MIDI program change number whenever one of its voices is selected, causing the

correspondingly numbered voice or program to be selected on the external MIDI device if the device is set up to

receive and respond to MIDI program change numbers.

This function makes it possible to cancel program change number reception and transmission so that voices

can be selected on the Clavinova without affecting the external MIDI device, and vice versa.

MIDI/

PIANO 1

TRANSPOSE

PIANO 2

= Program Change OFF

PIANO 2

= Program Change ON

Other MIDI Functions

Hold down the [MIDI/TRANSPOSE] button.

PIANO 2

PIANO

Press the [PIANO 1] voice selector. If the PIANO 1 LED is lit when

the [PIANO 1] voice selector is pressed, you have turned local control

OFF. If the PIANO 1 LED is not lit when the [PIANO 1] voice selector

is pressed, you have turned local control ON.

Release the [MIDI/TRANSPOSE] button.

Hold down the [MIDI/TRANSPOSE] button.

PIANO 2

PIANO

Press the [PIANO 2] voice selector. If the PIANO 2 LED is lit when

the [PIANO 2] voice selector is pressed, you have turned program

change reception/transmission OFF. If the PIANO 2 LED is not lit

when the [PIANO 2] voice selector is pressed, you have turned pro-

gram change reception/transmission ON.

Release the [MIDI/TRANSPOSE] button.

MIDI FUNCTION CHART

Function

Local Control ON/OFF

Program Change ON/OFF

Control Change ON/OFF

Multi-Timbre Mode

MIDI Split & Left Local OFF

MIDI Split & Right Local OFF

Panel Data Transmit

CLP-157 Voice Selector

[PIANO 1]

[PIANO 2]

[PIANO 3]

[CLAVINOVA TONE ]

[E.PIANO 1]

[E.PIANO 2]

[HARPSICHORD]