Yamaha Clavinova CLP-157 Kullanıcı El Kitabı - Sayfa 27

Müzik Enstrümanı Yamaha Clavinova CLP-157 için çevrimiçi göz atın veya pdf Kullanıcı El Kitabı indirin. Yamaha Clavinova CLP-157 39 sayfaları. Yamaha clavinova owner's manual

MIDI Functions
INOVA
ONE
E. PIANO 1 E. PIANO 2
MIDI/
TRANSPOSE
SPLIT POINT
Left-hand section plays
Right-hand section plays a
a DOU-10 bass voice.
Clavinova piano voice.
The MIDI Split & Right Local Off Mode
In the CLP-157 either the right- or left-hand section of the keyboard can be assigned to control an external
keyboard or tone generator. Assigning the left-hand section to external tone generator control was described in
the previous section. To assign the right-hand section to external tone generator control while playing the
Clavinova voices with the left hand, press the [E.PIANO 2] voice selector instead of the [E.PIANO 1] voice
selector when activating the Split mode (see the preceding section). All other operations are exactly the same as
described in the previous section.

Transmitting the Panel Settings

This function causes all the current Clavinova control settings (selected voice, etc) to be transmitted via the
MIDI OUT terminal. This is particularly useful if you will be recording performances to a MIDI sequence re-
corder which will be used to control the Clavinova on playback. By transmitting the Clavinova panel settings
and recording them on the MIDI sequence recorder prior to the actual performance data, the Clavinova will be
automatically restored to the same settings when the performance is played back.
MIDI/
ANO 2
TRANSPOSE

Bulk Data Dump

1
MIDI/
TRANSPOSE
PLAY
22
Z
Press the [E.PIANO 1] voice selector while holding down the [MIDI/
TRANSPOSE] button. The E.PIANO 1 LED will flash.
X
While still holding the [MIDI/TRANSPOSE] button, press the key on
the keyboard at which you want to set the split point. The E.PIANO 1
LED will light continuously. The split-point becomes the first key of
the left-hand section.
C
Release the [MIDI/TRANSPOSE] button.
V
To return to the normal full-keyboard mode, hold the [MIDI/TRANS-
POSE] button and press the [E.PIANO 1] voice selector, then release
both buttons.
Z
Hold down the [MIDI/TRANSPOSE] button.
HARPSI-
VIBES
CHORD
X
Press the [HARPSICHORD] voice selector.
C
Release the [MIDI/TRANSPOSE] button.
This function is used to transmit all data stored in the Recorder memory
to a MIDI data storage device such as the Yamaha DOU-10 Disk Orchestra
Unit, other sequence recorders, or MIDI compatible computers.
RECORDER
2
Z
Hold [MIDI/TRANSPOSE] and press the [PLAY] button. Transmis-
REC
sion will begin.
X
Release the buttons.
• When the power is turned ON the default split point key — F # 2 — will be
NOTE
automatically selected. If a new split point is selected it remains active
until the power is turned OFF or a different split point is selected.
• See page viii for list of the panel settings transmitted by this function.
NOTE
• Bulk dump will not function when the metronome is on or when the re-
NOTE
corder is in operation.