Yamaha Clavinova CLP-157 Посібник користувача - Сторінка 27

Переглянути онлайн або завантажити pdf Посібник користувача для Музичний інструмент Yamaha Clavinova CLP-157. Yamaha Clavinova CLP-157 39 сторінок. Yamaha clavinova owner's manual

Друкувати сторінку

MIDI Functions

INOVA

ONE

E. PIANO 1 E. PIANO 2

MIDI/

TRANSPOSE

SPLIT POINT

Left-hand section plays

Right-hand section plays a

a DOU-10 bass voice.

Clavinova piano voice.

The MIDI Split & Right Local Off Mode

In the CLP-157 either the right- or left-hand section of the keyboard can be assigned to control an external

keyboard or tone generator. Assigning the left-hand section to external tone generator control was described in

the previous section. To assign the right-hand section to external tone generator control while playing the

Clavinova voices with the left hand, press the [E.PIANO 2] voice selector instead of the [E.PIANO 1] voice

selector when activating the Split mode (see the preceding section). All other operations are exactly the same as

described in the previous section.

Transmitting the Panel Settings

This function causes all the current Clavinova control settings (selected voice, etc) to be transmitted via the

MIDI OUT terminal. This is particularly useful if you will be recording performances to a MIDI sequence re-

corder which will be used to control the Clavinova on playback. By transmitting the Clavinova panel settings

and recording them on the MIDI sequence recorder prior to the actual performance data, the Clavinova will be

automatically restored to the same settings when the performance is played back.

MIDI/

ANO 2

TRANSPOSE

Bulk Data Dump

MIDI/

TRANSPOSE

PLAY

Press the [E.PIANO 1] voice selector while holding down the [MIDI/

TRANSPOSE] button. The E.PIANO 1 LED will flash.

While still holding the [MIDI/TRANSPOSE] button, press the key on

the keyboard at which you want to set the split point. The E.PIANO 1

LED will light continuously. The split-point becomes the first key of

the left-hand section.

Release the [MIDI/TRANSPOSE] button.

To return to the normal full-keyboard mode, hold the [MIDI/TRANS-

POSE] button and press the [E.PIANO 1] voice selector, then release

both buttons.

Hold down the [MIDI/TRANSPOSE] button.

HARPSI-

VIBES

CHORD

Press the [HARPSICHORD] voice selector.

Release the [MIDI/TRANSPOSE] button.

This function is used to transmit all data stored in the Recorder memory

to a MIDI data storage device such as the Yamaha DOU-10 Disk Orchestra

Unit, other sequence recorders, or MIDI compatible computers.

RECORDER

Hold [MIDI/TRANSPOSE] and press the [PLAY] button. Transmis-

REC

sion will begin.

Release the buttons.

• When the power is turned ON the default split point key — F # 2 — will be

NOTE

automatically selected. If a new split point is selected it remains active

until the power is turned OFF or a different split point is selected.

• See page viii for list of the panel settings transmitted by this function.

NOTE

• Bulk dump will not function when the metronome is on or when the re-

NOTE

corder is in operation.