Clark Synthesis TACTILE SOUND AQ339 Aquasonic Kurulum Kılavuzu - Sayfa 11

Amplifikatör Clark Synthesis TACTILE SOUND AQ339 Aquasonic için çevrimiçi göz atın veya pdf Kurulum Kılavuzu indirin. Clark Synthesis TACTILE SOUND AQ339 Aquasonic 12 sayfaları. Underwater speaker
Ayrıca Clark Synthesis TACTILE SOUND AQ339 Aquasonic için: Tamamlayıcı Kılavuz (4 sayfalar), Teknik Özellikler (1 sayfalar), Parça Listesi (1 sayfalar), Kullanıcı Kılavuzu (1 sayfalar), Referans Sayfası (1 sayfalar), Kurulum Kılavuzu (3 sayfalar), Şartname (1 sayfalar), Kurulum Kılavuzu (20 sayfalar)

Sayfayı Yazdır
Clark Synthesis TACTILE SOUND AQ339 Aquasonic Kurulum Kılavuzu
The speaker is buzzing:
•
In-wall installation: Insure the lock tab is properly inserted behind the lock tab receiving plate.
•
Drop-in use: Insure the speaker is not vibrating against the pool wall.
The speaker stopped working:
•
If the speaker stops playing, it is likely that the built-in protection circuit has activated. In the event
this happens, turn the amplifier off for approximately 60 seconds to allow the circuit to reset. Turn
down the volume on the stereo system and amplifier. Operate the system at lower volume levels
to avoid overloading the speaker.
•
If the speaker still does not play, check to insure all wiring connections are properly connected and
that output is coming from the audio system.
The speaker has low output:
•
Check the amplifier/receiver output settings to insure they are properly set.
•
If you are using a DVD/CD/MP3 player, insure the output volume is set correctly.
For additional questions/concerns/issues, contact Clark Synthesis or check our web
site.
MANUFACTURER CONTACT INFORMATION:
Clark Synthesis, Inc.
Phone: 303-797-7500
Fax: 303-797-7501
Web: www.clarksynthesis.com
www.clarksynthesis.com
TROUBLESHOOTING
11
Underwater Speaker