ACOPOWER HY-SPKP-200W30A Kullanıcı Kılavuzu - Sayfa 13
Solar panel ACOPOWER HY-SPKP-200W30A için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. ACOPOWER HY-SPKP-200W30A 17 sayfaları. Solar panel kits
Sayfayı Yazdır
Once the battery is connected to the charge controller and the panel(s) are positioned
and mounted in the desired location, we are ready to connect the panel(s) to the charge
controller.
Panels should be mounted in a place that is free from shading by neighboring obstacles
such as vents, air-conditioners, TV antennas, etc.
Please refer to Figure 4 when completing the following connections:
1.
First, mate the "Male" MC4 Connector from the solar panel that has the negative (−)
label with the "Female" MC4 Connector of your adapter kit as shown in Figure 4.
Then connect the bare stranded portion of the cable to the negative (−) solar input
terminal on the charge controller.
Next, mate the "Female" MC4 connector from the panel that has the positive (+)
2.
label with the "Male" MC4 connector of your adapter kit as show in Figure 4.
3.
Connect the bare stranded portion of the adapter cable to the positive (+) solar
input terminal on the charge controller. Remove the protective cloth. If there is
enough sunlight present, the controller's solar indicator/icon on the LCD display
should show that it is now charging your battery(s).
The panel MUST be covered with a dark cloth to prevent the solar cells
from producing energy; this will prevent and reduce shock hazard, which
can be life threatening.
MC4
Figure 4 Completed 12V off-grid system
12
Email: [email protected]
Address:4120 Valley Blvd, Walnut CA 91789, USA
Call: (626) 575-7722
Web:www.acopower.com