Clarke CJS20Li Kullanım ve Bakım Talimatları Kılavuzu - Sayfa 8

Elektrikli Alet Clarke CJS20Li için çevrimiçi göz atın veya pdf Kullanım ve Bakım Talimatları Kılavuzu indirin. Clarke CJS20Li 17 sayfaları. 20v cordless jigsaw

Sayfayı Yazdır
ADJUSTMENTS
ADJUSTING THE PENDULUM
The pendulum moves the blade away from the cut on the down (non-cutting)
stroke and forward into the workpiece on the upward (cutting) stroke. The
pendulum can be particularly useful when cutting thicker, denser materials.
1. Adjust the pendulum control to
suit the material being cut using
the following suggested settings
as a starting point if required. Do
not use the pendulum action for
cutting ceramics or metals.
Material
Ceramics
Metal
Plywood, Plastics
Timber, Fiberglass & Chipboard
ADJUSTING THE SOLE PLATE
The sole-plate is adjustable so that bevels of up to 45° may be cut. Loosen the
two socket head screws under the sole-plate before adjusting it to the desired
angle and re-tightening the screws.
Parts & Service: 020 8988 7400 / E-mail: [email protected] or [email protected]
Pendulum Setting
0
0
1-2
1-3
8