Clarke CJS20Li Kullanım ve Bakım Talimatları Kılavuzu - Sayfa 9
Elektrikli Alet Clarke CJS20Li için çevrimiçi göz atın veya pdf Kullanım ve Bakım Talimatları Kılavuzu indirin. Clarke CJS20Li 17 sayfaları. 20v cordless jigsaw
OPERATION
SWITCHING ON/OFF
• Ensure that the workpiece is securely held and the cutting line is
clearly marked.
1. Place the sole-plate on the workpiece taking care that the blade is not
touching the workpiece or striking on anything below.
2. Press and hold the safety switch
and then squeeze the trigger.
• The jigsaw has a variable speed
trigger. For increased speed,
squeeze the trigger harder.
• Let the blade work through the
workpiece, ensuring the sole
plate is flush with the
workpiece.
3. Release the trigger to stop the
saw.
WARNING: THE BLADE WILL CONTINUE TO RUN FOR A SHORT PERIOD
AFTER THE TRIGGER HAS BEEN RELEASED. WAIT UNTIL IT STOPS BEFORE
REMOVING IT FROM THE WORKPIECE.
PARALLEL FENCE
1. Insert the parallel fence as shown.
2. Secure in place with the locking
screw.
Parts & Service: 020 8988 7400 / E-mail: [email protected] or [email protected]
9