Clarke STRONG-ARM CSA20EP Kullanım ve Bakım Talimatları Kılavuzu - Sayfa 6
Elektrikli Alet Clarke STRONG-ARM CSA20EP için çevrimiçi göz atın veya pdf Kullanım ve Bakım Talimatları Kılavuzu indirin. Clarke STRONG-ARM CSA20EP 17 sayfaları. 20 tonne hydraulic press
Sayfayı Yazdır
6. Take the bottle jack unit, and by
pressing down on the moving
cross beam against the resistance
of the springs, manoeuvre the
jack so that the jack ram sits in the
socket below the cross beam.
7. Using the small hex bolt and nut,
secure the jack to the beam.
• The jack will remain self-centred
during use.
Bolt the two halves of the pressing
bed together using the long bolts
with nuts and spacer tubes supplied.
8. Insert the bed support pins into
the holes in the side support at a
height of your choosing. Then
lower the pressing bed onto the
pins.
Parts & Service: 020 8988 7400 / E-mail: [email protected] or [email protected]
6