Clarke STRONG-ARM CSA20EP Manuale di istruzioni per il funzionamento e la manutenzione - Pagina 6
Sfoglia online o scarica il pdf Manuale di istruzioni per il funzionamento e la manutenzione per Utensile elettrico Clarke STRONG-ARM CSA20EP. Clarke STRONG-ARM CSA20EP 17. 20 tonne hydraulic press
Stampa la pagina
6. Take the bottle jack unit, and by
pressing down on the moving
cross beam against the resistance
of the springs, manoeuvre the
jack so that the jack ram sits in the
socket below the cross beam.
7. Using the small hex bolt and nut,
secure the jack to the beam.
• The jack will remain self-centred
during use.
Bolt the two halves of the pressing
bed together using the long bolts
with nuts and spacer tubes supplied.
8. Insert the bed support pins into
the holes in the side support at a
height of your choosing. Then
lower the pressing bed onto the
pins.
Parts & Service: 020 8988 7400 / E-mail: [email protected] or [email protected]
6