Zanussi FI 1073 Talimat Kitapçığı - Sayfa 10

Yıkayıcı Zanussi FI 1073 için çevrimiçi göz atın veya pdf Talimat Kitapçığı indirin. Zanussi FI 1073 22 sayfaları. Washing machine fi 873 - fi 1073

1 Detergent dispenser drawer

2 Operating pilot light

This light is on whilst the machine is operating

and goes out at the end of the programme.

3 START/STOP button

Press this button to start the machine: the «pilot»

light will come on. The same button is used to

switch the machine off.

Before selecting a programme or changing an

ongoing programme the machine must be

switched off by depressing the same button.

By depressing this button the spin speed is

reduced as follows:

- from 800 to 400 rpm and from 1000 to

600 rpm (according to the model) in the

programmes for cotton and linen

- from 750 to 400 rpm in the programmes for

synthetics, delicates and wool.

USE

3 4 5

5 Rinse hold (anti-crease) button

Press this button to make the machine stop with

water in the drum after the synthetic or delicate

wash cycles.

This prevents any creasing which may take place

if the clothes are left damp in the drum. When it

is convenient for you to empty the machine,

simply press this button again so that the

machine can proceed to drain and spin, or turn

the dial to the drain programme "Q".

If the button has not been depressed, the

programme will end with a short spin.

Turn this dial to select the washing temperature.

Position

Depress the dial to pop it out.

To select the required programme, turn this dial

clockwise until the programme letter is exactly

opposite the pointer.

Depress the dial to pop it out.

= cold wash.