Zanussi FJE 1207 Kullanıcı Kılavuzu - Sayfa 16

Yıkayıcı Zanussi FJE 1207 için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. Zanussi FJE 1207 23 sayfaları. Zanussi washer user manual
Ayrıca Zanussi FJE 1207 için: Kullanıcı Kılavuzu (24 sayfalar)

Sayfayı Yazdır

Operating sequence

Before washing your first load of laundry, we

recommend that you run a cotton cycle at 60°C, with

the machine empty, in order to remove any

manufacturing residue from the drum and tub.

Pour half a measure of detergent into the main wash

compartment and start up the machine.

1. Place the laundry in the drum

Open the door.

Place the laundry in the drum, one item at a time,

shaking them out as much as possible.

Close the door.

2. Measure out the detergent

Pull out the dispenser drawer until it stops. Measure

out the amount of detergent recommended by the

manufacturer in a graduated cup and pour it into the

main wash compartment

If you wish to carry out the prewash, pour detergent

into the appropriate compartment marked

3. Measure out the additive

If required, pour fabric softener into the compartment

marked

, without exceeding the «MAX» mark.

4. Switch the machine on

To switch the machine on, press the ON/OFF button

: the mains-on light comes on.

5. Select the desired programme/

fabric

Press the FABRIC button

select the desired programme/fabric. The relevant

light will light up.

The lights relevant to the phases that form the

programme will light up.

The light of the START/PAUSE button will start

flashing.

6. Select the temperature

Press the TEMPERATURE button

select a temperature value different from the one

proposed by the washing machine.

The relevant light will light up.

repeatedly, in order to

if you wish to