Zanussi ZHC 920 Kullanım Talimatları Kılavuzu - Sayfa 4

Havalandırma Davlumbazı Zanussi ZHC 920 için çevrimiçi göz atın veya pdf Kullanım Talimatları Kılavuzu indirin. Zanussi ZHC 920 14 sayfaları.

2 - Air discharge towards the wall (fig. 3)

In this case the hood can only be used in suction mode.

3 - Side air discharge, Lh or Rh (fig. 4a-b).

In this case the hood can only be used in suction mode.

S07_04

4.2 - Installation of the hood canopy C

1 - Drilling the wall

a) Using the cardboard template provided, mark on the wall the centres of holes 1 for fixing of the

hood canopy C. The centre of hole 2 for fixing the chimney, (fig. 5a) air outlet directed upwards or

towards the wall, (fig. 5b-c) air outlet to the right or left hand side, must be marked at a distance X

from the line between holes 1, obtained by measuring the extension Z of the chimney required for

installation, plus 28 mm X=Z+35-7. Using a Ø8 mm drill bit, drill the points marked in this way.

A03_05

b) When installed with the air outlet directed towards the wall (fig. 5a), it will be necessary to drill

an air ducting opening, measuring Ø120 or 150 mm, according to the diameter of the flange F

provided.

ø 8

100 100

105